316L bir aan lahayn 6 * 0.6 mm isku duuban / tuubooyinka xididka
SHARAXA:
316L bir aan lahayn 6 * 0.6 mm isku duuban / tuubooyinka xididka
Nooca 316 birta aan daahin waa austenitic chromium nikkel ahama bir ka kooban molybdenum.Kordhintaani waxay kordhisaa caabbinta daxalka guud, waxay wanaajisaa iska caabbinta daloolinta xalalka chloride ion, waxayna siisaa xoog korodhay heerkulka sare.Guryaha waxay la mid yihiin kuwa Nooca 304 marka laga reebo in daawadu ay xoogaa ka xoog badan tahay heerkulka sare.Iska caabinta daxalka waa la wanaajiyey, gaar ahaan ka hortagga sulfuric, hydrochloric, acetic, formic iyo tartaric acids;Acid sulfates iyo chlorides alkaline.Nooca 316L Stainless Steel waa nooc kaarboon ah oo aad u hooseeya oo ah Nooca 316 kaas oo yareeya roobka karbidhida waxyeelada leh ee aaga kulaylka saameeyay inta lagu jiro alxanka.
Foomamka wax soo saarka:
316L bir aan lahayn 6 * 0.6 mm isku duuban / tuubooyinka xididka
Sheet, Xarig, tuubo, tuubo
QAABKA:
316L bir aan lahayn 6 * 0.6 mm isku duuban / tuubooyinka xididka
ASTM A240, A666
CODSIGA CAADIGA AH:
316L bir aan lahayn 6 * 0.6 mm isku duuban / tuubooyinka xididka
mashiinnada qiiqa, qaybaha foornada, kulaylka beddelayaasha, qalabka dawooyinka iyo sawir-qaadista, valve iyo jar-jarka bamka, qalabka kiimikada, digsiyeyaasha, taangiyada, uumiga, saxarka, qalabka farsamaynta waraaqaha iyo dunta, qaybaha soo gaadhay jawiga badda iyo tuubooyinka
KA MID AH kiimiko: ASTM A240, A666
316L bir aan lahayn 6 * 0.6 mm isku duuban / tuubooyinka xididka
| Curiyaha | Nooca 316 | Nooca 316L |
|---|---|---|
| Kaarboon | 0.08 max. | 0.030 max. |
| Manganese | 2.00 max | 2.00 max |
| Baaruud | 0.030 max. | 0.030 max. |
| Fosfooraska | 0.045 max. | 0.045 max. |
| Silikoon | 0.75 max. | 0.75 max. |
| Chromium | 16.0 - 18.0 | 16.0 - 18.0 |
| Nikkel | 10.00 - 14.00 | 10.00 - 14.00 |
| Molybdenum | 2.00 - 3.00 | 2.00 - 3.00 |
| Nitrojiin | 0.10 max | 0.10 max |
316L bir aan lahayn 6 * 0.6 mm isku duuban / tuubooyinka xididka
HANTIDA MACAN: ASTM A240
| Nooca | Xoogga Wax-soo-saarka 0.2% ka-baxsan (KSI) | Xoogga Jilitaanka (KSI) | % Ballaarinta (2 ″ dhererka cabbirka) |
|---|---|---|---|
| 316 | 30 daqiiqo | 75 min. | 40 daqiiqo |
| 316L | 25 daq. | 70 daqiiqo | 40 daqiiqo |
HANTIDA JIDHKA:
| Cufnaanta (lb./ gudaha ^2) @ RT | 0.29 | |
|---|---|---|
| Qaabka Elasticity in Kacsanaanta (psi x 10^6) | 28.0 | |
| Kuleylka Gaarka ah (BTU/o F/lb.) | 32 ilaa 212 F | 0.12 |
| Heerarka kulaylka (BTU/saacaddii/ft^2/ft) | 212oF | 9.4 |
| 932oF | 12.4 | |
| Isku-dubbaridka Ballaadhinta kulaylka (gudaha x 10^-6 halkii o F) | 32 ilaa 212oF | 8.9 |
| 32 ilaa 600oF | 9.0 | |
| 32 ilaa 1,000oF | 9.7 | |
| 32 ilaa 1,200oF | 10.3 | |
| Iska caabinta korantada (ohms-yar-yar) | at 70oF | 29.4 |
| Meesha dhalaalaysa (oF) | 2500 - 2550 |
